Kingbolen K8 Pro. Free software update for life

 It offers a wide range of functions, including:

1. OE-Level All System Diagnostics:

 * Read/Clear Fault Codes (DTCs): Identifies and erases trouble codes from all available vehicle control modules (Engine, Transmission, ABS, SRS Airbag, TPMS, BCM, Chassis System, Electrical System, etc.).

 * Live Data Streaming: Displays real-time data from various sensors and components in text or graph format, allowing for in-depth analysis of vehicle performance. It can also combine multiple data streams for comparison.

 * Freeze Frame Data: Captures a snapshot of vehicle conditions at the moment a fault code was set, helping to pinpoint the cause.

 * Retrieve ECU Information: Accesses specific information about the vehicle's electronic control units.

 * AutoVIN Technology: Automatically identifies the vehicle for quicker diagnosis.

2. Bi-directional Control (Active Tests):

 * Allows the user to send commands to vehicle ECUs to activate or test specific components and systems (e.g., turn on/off radiator fan, windows, mirrors, horn, EVAP test, fuel pump, etc.) without manually operating the vehicle. This helps to quickly pinpoint faulty components.

3. ECU Coding:

 * Online/Offline Coding: Supports online coding for brands like VW, Audi, and BMW, and offline coding for Mercedes-Benz.

 * Customization: Enables unlocking hidden features, customizing vehicle settings (e.g., disabling auto start-stop, changing daytime running light settings, adjusting speed limits), and optimizing vehicle performance.

 * Component Matching/Adaptation: Allows matching new components with the ECU after replacement (e.g., steering angle sensor, ignition coil, clutch).

 * Programmable Module Installation (PMI): For Ford/Lincoln/Mazda, it simplifies module replacement by allowing copying and restoring ECU data to new parts.

4. Special Functions (34+ Reset/Maintenance Services):

The K8 Pro includes a vast array of common service functions, such as:

 * Oil Reset Service: Resets the oil life system after an oil change.

 * EPB (Electronic Parking Brake) Reset: Resets the electronic parking brake system after brake pad replacement.

 * SAS (Steering Angle Sensor) Reset: Calibrates the steering angle sensor.

 * BMS (Battery Management System) Reset: Resets the battery monitoring system after battery replacement.

 * ABS Bleeding: Performs bleeding of the brake system to restore ABS brake sensitivity.

 * Electric Throttle Relearn: Initializes the throttle actuator.

 * DPF Regeneration: Performs regeneration of the Diesel Particulate Filter.

 * TPMS Reset: Resets the Tire Pressure Monitoring System.

 * Injector Coding: Writes injector actual codes to the ECU.

 * Gear Learning: Adapts the transmission.

 * Suspension Reset: Calibrates the suspension system.

 * Sunroof Reset: Initializes the sunroof.

 * Adaptive Front Lighting System (AFS) Reset: Resets adaptive headlights.

 * Gearbox Relearn: Adapts the gearbox.

 * EGR Adaptation: Adapts the Exhaust Gas Recirculation system.

 * Crankshaft Position Sensor Relearn

 * Fuel Trim Reset

 * HVAC Control Module Calibration

 * Language Change

 * A/F Settings

 * Nox Sensor Reset

5. Advanced Features:

 * CAN-FD & DoIP Protocol Support: Compatible with newer vehicle communication protocols (e.g., GM 2019+, BMW F/G chassis 2017+, Jaguar/Land Rover 2017+, Volvo 2018+), often without needing extra adapters.

 * FCA AutoAuth: Unlocks the Secure Gateway (SGW) on Chrysler, Dodge, Jeep, Alfa Romeo, and Fiat vehicles (2017+).

 * Guided Functions: Provides step-by-step instructions for complex service tasks, especially for Volkswagen/Audi vehicles.

 * Remote Diagnostics & Diagnostic Feedback: Allows for remote assistance and sending diagnostic reports for feedback.

6. Key Programming (for the K8 IMMO version):

While the standard K8 Pro focuses on diagnostics and service functions, Kingbolen also offers a "K8 IMMO" version that includes advanced key programming capabilities:

 * Key Matching/Copy: Adding/deleting key fobs, key generation, key learning, remote learning.

 * IMMO ECU Reset/Adaptation/Refresh/Coding: Resetting, adapting, or coding the immobilizer ECU.

 * Read PIN/CS (All Key Lost): Retrieving the PIN code when all keys are lost.

 * Read & Write EEPROM/MCU/ECU Chip Data: Accessing and modifying data on various chips.

7. Hardware Specifications:

 * Operating System: Android 10.0

 * Screen: 8-inch HD IPS touchscreen

 * Memory: 2GB RAM + 64GB storage

 * Battery: 12600mAh for extended use

 * Camera: Rear 8MP for VIN identification.

 * Connectivity: Bluetooth wireless diagnosis (VCI allows remote diagnostics up to 10m), Wi-Fi (2.4 & 5.0 GHz Dual-Frequency).

 * Kickstand: Built-in for hands-free use.

In essence, the Kingbolen K8 Pro is a powerful and versatile diagnostic tool that aims to provide comprehensive, OE-level functionality for a wide range of vehicles, making it suitable for professional workshops and advanced DIYers.